Message
Board | Products
| Gallery
| Gallery2
| Rideouts
| Downloads
Tips/FAQ's
| VMax
In Print
| Links
| 1985
Press Release | VMax
Story
Model
History | Weather
Forecast | Route
Planner | Gatso
Locator| e-mail
Vmax Dyno's - Superbike Mike
Naturally aspirated h/p "King"
The Max is 174 h/p, 1425cc,and runs on pump gas.
Note it outpulls the ZX-11 up until about 8 grand.
dyno courtesy of Mike Keyte of Superbike Mike Engineering, Inc.
The following specs may be of interest...
- 83mm Piston, blanks CNC machined by sbm to 12.5:1 measured
- Stock crank, Carillo rods, detailed cases sleeved & bored, 800 grit finish
- Stage III heads with 33.5 x 27.5 valves, 153cfm by our porting dept.
- Cams - secret combo available to buyers only
- 39 CR carbs on short rubber adapters, dual cable system
- V-Boost IS active and useful
- Trans is CNC undercut by sbm
- Exhaust is Stainless Steel, 1.75 head pipes, hand made 4-2-1 with short muffler
- Chain drive
Back to TIPS
Back to ARTICLES
Back to DYNO'S