Maxlight Kit, replaces the wiring to the Headlight Bulb improves light output by removing all the joints and connections in the stock loom.

Because we only have 12 volts from the battery, Max Light ensures that all of those 12 volts get to the headlamp bulb without any drop in voltage caused by other devices in the circuit. The stock lighting circuit is only used as a pilot circuit to control Max Light so it also reduces the electrical strain on the bikes wiring loom. It will allow you to use higher wattage bulbs, again without straining the loom.

Fitting a Max Light kit will improve the functionality of other devices in the circuit since the power previously used for the headlight can be used for other things like the ignition, starter motor etc. etc. When the kit was tested on the bike gained 2 volts at the head light socket, this may vary between bikes. The Kit is easy to fit ‘plug and play,' only quality components are used throughout and uses heavier gauge wiring so all voltage drop is eliminated it also has its own 25Amp fuse and comes with full easy to understand instructions.

Price per Kit excluding postage £38.  

For UK postage add £3.00

 

Cheque, Cash or paypal

 

Email jonpullara@vmaxchat.co.uk