|
Message
Board | Products
| Gallery
| Gallery2
| Rideouts
| Downloads VMax Gallery Trikes Page |
|
| Jimmy The Trike's Max | |
 |
No details yet.... |
| Someones Trike in Austrailia | |
|
No details yet.... |
| Seen on the Ace Cafe run | |
|
No details.... |
| Andrew Docwra's Trike | |
Before After  
|
I’ve had my Vmax
converted by Nutty Norman and I must say I am very pleased with it.
Everything possible has been powder coated (Aerocoat,
Great Yarmouth) and it took about 4 months to complete. I bought the
original Max from Bike Direct in The Artwork on the
tank was done by Darren Horton, which I think really brings the piece
together. The photos are the
original bike and the finished project to date. At the moment the Trike is stripped down, the engine covers are being powered coated, and the exhaust has been extended so it comes all the way out of the back. I’ve fitted some LED lights to the mud guards which are now having some more art work by Darren Horton. Also many other little things that should keep me busy through the winter, like R1 Callipers and forward controls, colour coded coolant pipes, Z-Boost, Tim’s pressure gauge and colour coded brake/clutch lines and the list goes on.
|
| VMaxJeans Trike | |
 
|
I bought the Max for my husband
but he went back to a Harley so I had it triked, The work was done at
Trike Design by Hank and Robin[ www.hankschopshop.com ] all the bolt
on bits are from Exactrep including the devil exhaust system, Just
waiting for my new paint job and P.D.Q. to get there rolling road
finished and then have loads of fun.
|
| CheakyWheassell's Trike | |
 
|
My trike took 12 months to build , still building on it its a 97/98 model . Engine standard as now but will be incorporating some go faster bits for it in the future . Just getting used to the handling of the ''Beast''... hope to see more max's out there on my rounds . |
| Dermot Bradleys Trike | |
  
|
|
| Ian Phillips Trike | |
|
Trike
was built by TRIKE DESIGN in Caerphilly, Wales. It is a 1999 full power,
T1 VMX reg plate. It was designed and built to my spec as i am in a
wheelchair and paralyzed from the chest down.
|
| Darren's Trike | |
 
|
After
having a bike accident and ending up having to use a wheel chair, I
decided to build a trike. I bought a 1997 VMax and over a period of 12
months turned it into a trike.
It
has an electronic gear selector and dual brakes on the handlebars.
I
have designed it to put my wheelchair on the back.
I
used a Robin Reliant axle and put a rear disc on it, using Nova front
discs and Golf GTi rear calipers.
It
has straight through exhausts to carbon rear race cans,etc.
I
would like to change the front end to u.s.d. forks and front wheel.
|
| shaggy696969's Trike |
|
  
|
First pic is as bought , bar I put
on the ahem "edited via Dremel", Over
carbon cans and a belly pan.
2nd pic Max at baskers ,
modifications inc, Dave F's windowed clutch , frame bars
, renthals, billet levers, 98 front end, Ohlins springs , R1 discs
and
calipers front , Jon's R1 rear R1
disc and caliper conversion, Oil pressure gauge
, Sissy bar and rack , Billet fork brace , Hel braided lines , custom
Paint , RD125 headlight and cockpit
fairing , Jons L.e.d cat's eye light And not
least of all a Pimp My Ride sticker . lol
3rd pic Trike'd it for the wife ,
Reliant rear axle shortened , MG ZR wheels, led repeaters and side
lights , Hypercharger .
Truly a work in progress , Evolution
huh
|
